Pressure Washer Soap Injector
10 Best Pressure Washer Soap Injectors To Buy (Our Recommendations)
Sooprinse Chemical Injector Kit for High Pressure Washer, 4000 PSI Adjustable Soap Dispenser with a 1/4 Inch Black Soap Nozzle and Teflon Tape,16 Ft Siphon Hose, 3/8 Inch Quick Connect
$18.89 in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- ❤【Premium Quality】Made of tough brass and stainless steel,resistant to corrosion and fading.
- ❤【Instructioin Manual】The maximum pressure is 4000 PSI. Flow arrows Marks on the injector and do not install it backwards.
- ❤【Kit Package】The chemical injector kit includes chemical injector, 16 feet tubing (siphon hose), filter and 1/4 inch quick connect black soap nozzle which connect to your gun or wand.
- ❤【Scientific Design】The soap dispenser kit is equipped with a screw-in valve that adjusts the dilution ratio of chemicals and water to increase the efficiency of your high pressure washers.
- ❤【Quality Assurance】Any problem,feel free to contact us.The professional team is always ready to serve you.
Raincovo Chemical Injector Kit, Soap Injector for Pressure Washer, 1/8 Inch 27 Male BSP Thread
$10.99
in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- Chemical injector kit fits most pump which is an OEM brand. Replaces pump 203640GS 308452002, 190593GS and 190635GS.
- Soap injector makes cleaning so much easier and faster. It’s a great replacement for the old rusted one.
- The brass fitting is a 1/8 inch 27 male BSP thread. Install them and the soap dispenser works just like new.
- How to install: Take the brass fitting, drop in the little ball, insert spring with small end against the ball, then attach it back on the pump. Do not over-tighten otherwise it will snap off.
- Kit includes 2 pieces fittings, 2 pieces small balls, 2 pieces springs, 2 pieces o-rings outside and 4 pieces inside.
RIDGE WASHER Compatible Chemical Injector Set for Pressure Washer, Replacement for 203640GS 190593GS 190635GS
$11.99
in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- Package: two chemical injector sets include two brass barbs with 1/8 inch-27 male BSP thread, two check valve balls, two springs and four o-rings.
- Compatible: Pressure washer soap injector kit is compatible with Pump 190593GS, 190635GS and 203640GS. Please check the part number of your pressure washer pump and make sure the soap injector matches your pump.
- Function: If the part on your pressure washer pump is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set.
- Attention: When you insert injector into receptacle of pump and tighten injector with 13mm wrench, don't overtighten, you'll break the o ring or crack white metal on pump.
- If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories.
M MINGLE Adjustable Chemical Injector Kit for Pressure Washer, Soap Injector, 3/8 Inch Quick Connector
$19.99 in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- Attention: Max pressure is 3200PSI. Pressure washer downstream chemical injector kit includes chemical injector, 10 feet tubing (siphon hose), filter and black soap nozzle.
- Used to siphon detergent out of separate container. The chemical or soap runs after pump, which will not damage pump. Great for cleaning or spraying.
- Control metering valve to adjust dilution ratio of chemical and water. Chemical-resist and poly strainer reduces injector clogging.
- Soap injector has universal 3/8’’ quick disconnect. It connects between pressure washer pump and hose.
- Flow rate is from 2 GPM to 5 GPM. Works with most brands of gas and electric pressure washer, cold and hot water pressure washer.
Raincovo Downstream Injector for Pressure Washer, Power Washer Chemical Injector Kit, Soap Injector, 3/8 Inch Quick Connect, 4000 PSI
$19.99 in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- Package: Kit Includes chemical injector, 10 feet siphon hose, filter, black nozzle soap with 1/4” quick connect and teflon tape.
- Application: When detergent is sucked out separately, the chemical will not pass through the pump, you could use a variety of chemicals without damaging the pump.
- Characteristic: Chemical injector kit with a metering valve, which can adjust dilution ratio of soap and water. Avoid clogging of the injector and improve the efficiency of pressure washer.
- Connector: Downstream Injector has 3/8 inch quick connect. Fits most electric and gas power washer.
- Material: Siphon hose is made of high-quality PVC, used for hot and cold water. Adapter is made of brass and stainless steel. Max pressure is 4000 PSI. Flow rate is 2 to 5 GPM.
PWACCS Adjustable Soap Chemical Injector for Pressure Washer, Downstream Injector for Power Washer, 3/8 Inch Quick Connect
$17.99 in stock
1 used from $18.04
Free shipping
Amazon.com
as of July 5, 2022 12:42 am
Features
- Attention: Pressure washer chemical injector's working pressure is from 1000 to 3200 PSI. Flow rate: 1.5 GPM to 4 GPM. The presure which is higher than 3200 PSI will not work. Include chemical injector, 10 Feet tubing, filter and black soap nozzle.
- Application: Downstream injector for pressure washer is used to siphon detergent out of separate container. The chemical runs after pump. So it allows for a wider choice of chemicals.
- Chemical injector has standard 3/8’’ quick connect plug and 3/8’’ quick connect socket. Soap injector for pressure washer connects pressure washer pump to hose. Adjusts the dilution ratio of chemicals and water by metering valve.
- Dilution ratio of chemical vs water can been adjusted by controlling metering valve. Ideal for most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer.
- If the pressure washer chemical injector kit have any questions, please contact us at first time. We provide a service of quick reply within 24 hours.
REPLACEMENTKITS.COM Pressure Washer Chemical Soap Injector Kit fits Briggs & Stratton, Homelite, Ryobi & Husky Replaces 190593GS 190635GS & 203640GS
$9.50
in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- Pressure Washer Chemical Soap Injector Kit for Briggs & Stratton replaces 190593GS, 190635GS & 203640GS
- Replaces 190593GS, 190635GS & 203640GS & 308452002
- Brass Barb, 2 O-Rings and 1 Check Valve Ball
- Replacement Kits Brand Aftermarket Parts
- 100% Satisfaction Guaranteed
General Pump Quick Connect Pressure Washer Detergent Injector - 2.1mm Orifice, 4500 PSI, Model Number N100812P
$27.99
in stock
3 new from $27.76
Free shipping
Amazon.com
as of July 5, 2022 12:42 am
Features
- Adjustable control
- 2.1mm orifice for pressure washers up to 5.0 GPM
- For cold or hot water applications, up to 200deg F
- 3/8in. inlet/outlet
Tempono Pressure Washer Soap Injector, Downstream Injector for Pressure Washer, Power Washer Chemical Injector Kit, 4000 PSI, 3/8 Inch Quick Connect
$18.99
in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- Pressure chemical injector ensures that chemicals do not pass through the pump. Protect the performance of the pump and extend its service life.
- Chemical injector kit has 10 ft tube, soap injector, filter, nozzle and teflon tape. Max pressure is up to 4000 PSI.
- Chemical injector has an metering valve. You can control the concentration of the liquid. Flow rate is 2 to 5 GPM.
- Downstream injector for pressure washer with 3/8 inch quick connector. Please pay attention to mark of arrow direction on injector, do not install it backwards.
- The coupler is made of stainless steel and brass, sturdy and durable. Siphon hose is made of high-quality PVC, suitable for hot and cold water.
Sellerocity Kit Pressure Washer Chemical Detergent Soap Down Stream Injector 3-5 GPM 2.1 Orifice, Hose Filter & 3/8 NPT Size Quick Connects
$28.98
in stock
Amazon.com
as of July 5, 2022 12:42 am
Features
- 6 month no hassle warranty
- Ships from Sellerocity in Sarasota, Florida
- Direction of flow 'arrow' marked on injector
- These chemical injectors have a maximum chemical draw of 20% of the flow through the injector, although with various points of restriction through an average system, actual flow is estimated at 12%-18%.