If you’re looking for a way to clean your sewer lines without calling in a professional, you may be wondering if it’s possible to convert a pressure washer into a Sewer Jetter. The answer is yes – it is possible! In this comprehensive guide, we will walk you through the steps necessary to make this conversion.
We’ll also provide some tips on how to get the most out of your Sewer Jetter. So whether you’re a homeowner who wants to take care of minor plumbing issues on your own, or you’re a professional contractor who needs to clean out stubborn clogs, read on for all the information you need!
Introduction To Sewer Jetters
A Sewer Jetter is a specialized piece of equipment that is used to clean out clogged sewer lines. It consists of a high-pressure water pump, a hose, and a nozzle. The pump forces water through the hose and out the nozzle at very high pressure – up to 4000 psi. This high-powered stream of water is powerful enough to break up stubborn clogs and debris, and flush it all away.
Let’s Convert A Pressure Washer Into A Sewer Jetter
Now that you know what a Sewer Jetter is, let’s talk about how to convert a pressure washer into a Sewer Jetter. Following are the step-by-step instructions:
- Step one: Decide which type of pressure washer you want to use for your Sewer Jetter. There are two main types of pressure washers – electric and gas. Electric pressure washers are smaller, lighter, and more portable, while gas pressure washers are stronger and can generate more pressure.
- Step two: Choose a high-pressure hose that is long enough to reach the sewer line you need to clean. Hoses typically range in length from 25 to 100 feet.
- Step three: Select a nozzle that is designed for use with a pressure washer. There are many different types of nozzles available, so it’s important to choose one that is compatible with your pressure washer.
- Step four: Connect the hose to the pressure washer. Make sure that the connections are secure and there are no leaks.
- Step five: Turn on the pressure washer and hold the nozzle at the end of the sewer line. Slowly move it back and forth to clean the entire length of the line.
- Step six: When you’re finished, turn off the pressure washer and disconnect the hose. Drain any remaining water from the hose before storing it.
- Step seven: Repeat the process as needed to keep your sewer lines clear.
That’s all there is to it! By following these simple steps, you can easily convert a pressure washer into a Sewer Jetter. Just remember to use caution when operating the pressure washer, and always wear protective gear – such as gloves, goggles, and earplugs – to avoid injury.
What You Should Know About Your Newly Converted Device?
Now that you know how to turn a pressure washer into a Sewer Jetter, there are a few things you should keep in mind.
- Use fresh water: Make sure you always use fresh, clean water when operating your Sewer Jetter. Dirty or contaminated water can damage the pump and hose, and may even cause injuries.
- Be careful with the pressure: The water coming out of the Sewer Jetter is under a lot of pressure – up to 4000 psi. That’s why it’s important to be careful when using it. Never point the nozzle at yourself or anyone else, and always keep your finger on the trigger in case you need to turn it off quickly.
- Don’t use it on grease: Grease is one of the most common causes of sewer line clogs. But because grease is also a lubricant, it can cause the pump and hose to overheat if you try to flush it away with the Sewer Jetter. So if you’re dealing with a grease clog, it’s best to call a professional.
- Know when to call a professional: Some clogs are just too tough for a Sewer Jetter. If you’ve tried everything and the clog is still there, it’s time to call a plumber.
- Store it properly: When you’re not using your Sewer Jetter, be sure to drain the hose and store it in a cool, dry place. And if you have an electric pressure washer, make sure to unplug it and disconnect the battery before storing it.
- Keep it clean: Regular maintenance is crucial for keeping your Sewer Jetter in good condition. Be sure to rinse the pump and hose after each use, and inspect them for any damage. You should also flush the nozzle with clean water to remove any debris that might be lodged inside.
- Have fun: Cleaning sewer lines may not be the most glamorous job, but it’s satisfying. So go out there and get away!
There you have it – everything you need to know about how to turn a pressure washer into a Sewer Jetter. With this handy guide, you’ll be able to keep your sewer lines clear and flowing freely.
Are There Any Other Ways To Convert A Pressure Washer Into A Sewer Jetter?
There are a few other ways to convert a pressure washer into a sewer jetter
1. Use A Converted Power Washer Wand:
One option is to use a converted power washer wand. Here is how you can do this:
- Step one: Remove the wand from the pressure washer
- Step two: Drill a hole in the wand at the end that attaches to the pressure washer
- Step three: Insert the garden hose into the drilled hole
- Step four: Attach the other end of the garden hose to the sewer jetter
Now your pressure washer is ready to act as a Sewer Jetter!
2. Use A Pressure Washer Hose:
Another option is to use a pressure washer hose. Here is how you can do this:
- Step one: Buy a pressure washer hose that is compatible with your pressure washer. The diameter of the hose should be at least ¼ inch.
- Step two: Cut the pressure washer hose to the desired length.
- Step three: Connect one end of the pressure washer hose to the outlet on the pressure washer and the other end to the inlet on the Sewer Jetter.
- Step four: Start the pressure washer and let it run for a few minutes to ensure that there are no leaks.
Now, you are ready to use your new Sewer Jetter! Simply point the hose towards the clog and start blasting away. Remember to keep the pressure washer hose as straight as possible to avoid damaging the sewer line.
3. Use A Pressure Washer Pump:
Another option is to use a pressure washer pump. Here is how you can do this:
- Step one: Buy a pressure washer pump that is compatible with your pressure washer. The flow rate of the pump should be at least four gallons per minute.
- Step two: Connect the outlet of the pressure washer pump to the inlet of the Sewer Jetter hose.
- Step three: Connect the pressure washer hose to the inlet of the pressure washer pump.
- Step four: Start the pressure washer and let it run for a few minutes.
- Step five: Turn on the Sewer Jetter hose and start clearing your drain!
You can find pressure washer pumps at most hardware stores. Make sure to get one that is compatible with your pressure washer model. The pump should have a flow rate of at least four gallons per minute.
4. Use An Adapter:
If you have a pressure washer with a quick connect fitting, you can use an adapter to connect the pressure washer hose to the Sewer Jetter. Here is how you can do this:
- Step one: Buy an adapter that will fit your pressure washer hose and the inlet on the Sewer Jetter.
- Step two: Connect the adapter to the pressure washer hose.
- Step three: Connect the other end of the adapter to the inlet on the Sewer Jetter.
- Step four: Turn on your pressure washer and let it run for a few minutes to make sure there are no leaks.
Now you are ready to use your Sewer Jetter!
5. Use A T-Fitting:
Another option is to use a T-fitting. Here is how you can do this:
- Step one: Cut the pressure washer hose in half using a pipe cutter.
- Step two: Connect one end of the pressure washer hose to the outlet on the pressure washer and the other end to the inlet on the T-fitting.
- Step three: Connect one end of the Sewer Jetter hose to the outlet on the T-fitting and the other end to the inlet on the pressure washer.
Now your pressure washer is ready to use as a Sewer Jetter! Just remember to use fresh water and not recycled water, as this can damage your pressure washer.
How Much Does It Cost To Convert A Pressure Washer To Jetter?
The cost of converting a pressure washer into a Sewer Jetter will vary depending on the method you choose. If you use an adapter, you can expect to pay around $15. If you use a T-fitting, you will need to purchase a pipe cutter, which will cost around $30.
If you use a pressure washer hose, you will need to purchase a new pressure washer hose, which will cost around $50. Finally, if you use a pressure washer pump, you will need to purchase a new pressure washer pump, which will cost around $100.
Do You Need A Sewer Jetter If You Have A Pressure Washer?
No, you do not need a Sewer Jetter if you have a pressure washer. However, if you have a clogged drain, a Sewer Jetter can be a helpful tool to clear the clog. Additionally, if you frequently use your pressure washer to clean drains, a Sewer Jettercan saves you time and effort in the long run. Jetters are also more effective than pressure washers at breaking up tough clogs.
Ultimately, the decision of whether or not to purchase a Sewer Jetter depends on your specific needs and budget. Moreover, if you are considering purchasing a pressure washer, you may want to consider a model that comes with a Sewer Jetter attachment. These models typically cost around $200.
Tips To Get The Most Out Of Your Sewer Jetter
Here are a few tips to get the most out of your Sewer Jetter:
- To clear a clog, start by running the Sewer Jetter through the cleanout.
- If the clog is still there, use the Sewer Jetter to snake through the drain until you reach the clog.
- Once you reach the clog, start blasting it with water until it is cleared.
- If you have a tough clog, you may need to use a cable auger to break it up before you can blast it away with the sewer Sewer Jetter.
- Remember to always use fresh water when using your Sewer Jetter. Recycled water can damage the pump on your pressure washer.
- If you are having trouble clearing a clog, call a professional plumber for help.
- Never use your Sewer Jetter without proper safety gear, including gloves, goggles, and a face mask.
- Never point the Sewer Jetter hose directly at yourself or anyone else.
- Never use your Sewer Jetter without proper training. If you are not sure how to use it, call a professional plumber for help.
- Never use your Sewer Jetter on a drain that is not connected to a sewer line. This can damage your pressure washer and void the warranty.
If you follow these tips, you will be able to clear any clog quickly and easily! Sewer jetters are a great tool to have in your plumbing arsenal.
A pressure washer can easily be turned into a Sewer Jetter with some basic plumbing skills and the right tools. This guide provides two methods on how to do this. Use the tips in this guide to get the most out of your Sewer Jetter and clear any clog quickly and easily!
We hope that you find this post about how to turn a pressure washer into a Sewer Jetter! If so, please share it with your friends and family! Thanks!