Top 10 Best Itron Gas Regulator To Buy (Our Recommendations)
Itron Gas Pressure Regulator
- Price For: Each Item: Gas Pressure Regulator Hose Type: 3/4 Inlet, 1 In outlet, 60 PSI MAX, Outlet Pressure 11"WC Country of Origin (subject to change): United States
Itron B42R Residential Gas Regulator 1/pkg Orifice: 1/8 x 3/16 1-1/4-2-1/4 PSIG
ITRON Gas Pressure Regulator, for Use with Mfr. No. DG250, DG400, S405, VG175, VG400
Itron B42R Gas Regulator 1/pkg Orifice: 3/16 Inch 1-1/4 to 2-1/4 PSIG
Itron B42R Gas Regulator 1/pkg Orifice: 1/8 x 3/16 Inch 6-8 IWC
RX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge With Gas Hose Welding Weld
$34.99 in stock
- 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet)
- 2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube.
- 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments.
- 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.
- 5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
Emerson-Fisher LP-Gas Equipment R622-DFF 2nd Stage Regulator, 9-13" W.C Spring, 3/4" x 3/4" NPT
- Body Sizes and End Connection Styles (inlet x outlet): 3/4 x 3/4-inch FNPT
- Maximum Inlet Pressure: 10 psig / 0,69 bar : Emergency Inlet Pressure: 50 psig / 3,4 bar
- Outlet Pressure Ranges : 9 to 13-inches W.C / 22 to 32 mbar
- Capacity : 1,400,000 BTU/hr
- Vent Size : 3/4 NPT screened
Maxitrol RV48L Natural Gas Pressure Regulator, 1/2" FPT Thread, 13/16" In and Out Opening, 1/2 PSIG In, 3"-6" WC Out
$21.75 in stock
- GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column
- PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in the picture’s table.
- CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer to the pictures before buying.
- MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column.
- OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4-Inch Male Flare Outlet Connection, Heavy-Duty Handle, Self-reseating Relief Valve, Nitrogen Regulator Hvac, Helium Regulator, by NAKAO
- ➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering
- ➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure.
- ➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation
- ➤Structure: Nitrogen Regulator 0-600PSI CGA580 Inlet, Solid brass, Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system),Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling
- ➤Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!
MENSI Natural Gas Pressure Regulator with 3/4" FNPT Thread, 1/2 PSIG Inlet Pressure and 4"-10" WC Out
- ❤ GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" -10" Water Column
- ❤ Inlet and Exit Thread 3/4" NPT to fit with 3/4" Rod Pipe.
- ❤ This regulator is adjustable can used for natural or propane application both but original setting is Natural.
- ❤ You can adjust the middle of the head in the regulator to control and adjust to suitable for propane.
- ❤ PERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.