RYOBI offers the best pressure washers in its electric washer range. Most of its washers are easy to maneuver and can go to lengths because of their longer hoses and better pressure levels. Its value for money also comes from the included induction motor that makes it durable and heavy-duty.
In addition to its easy-to-use electric washers, the company also produces gas pressure washers. Latter of these washers are preferred by commercial customers who want more power. For household use, electric units are most loved. So how to use Ryobi Pressure Washer?
RYOBI 2300 PSI pressure washer is the most common model among users. We shall detail using this unit in this article.
Purpose of RYOBI Pressure Washer
Before we start exploring the whole process, let’s explore its purpose.
This pressure washer is built for household use. You can wash your house facades, vehicles, and machinery. You can conduct high-pressure washing with it as well as apply detergent using its detergent tank and nozzle.
Types of RYOBI Pressure Washers
Among different pressures and powers of its pressure washers, RYOBI also offers variation in types of power systems for these. Its most popular range is of electric-powered pressure washers but it also manufactures and sells gas-powered models as well.
Note that the gas-powered pressure washers require more intense safety measures especially when it comes to starting the engine.
Pressure washers can be dangerous if used wrongly. Their jets and electric (or gas) connections make them unsafe for children’s use. Also, you have to be mindful of its operations if you want to prevent – minor and major – accidents.
We shall start this user guide by outlining the safety measures we should consider while using the washer.
This model comes equipped with a grounding plug and a grounding conductor. This plug should be inserted into an outlet with proper grounding.
Ground-fault circuit-interrupter is safety equipment that reduces the risk of fire from electric shock.
You may want to use an extension cord with this pressure washer. If you do, you have to choose those with 3-wire cords and 3-prong plugs for grounding. Also, this cord should have the same or higher rating than that offered by the unit.
Highlights of Safety Measures
Before reading these measures, know that they make only highlight what you should be mindful of while using the unit. You should read the whole manual to get a detailed insight into the precautionary measures.
In addition to reading the safety measures – as well as the process of operating the unit from the manual – you should also familiarize yourself with the different parts of the units to know how they operate and how to switch off the unit when things go south.
- Only use the unit when you can give your full attention to its operations. This unit is not intended for use of children, people with limited abilities, or drugged people.
- Wear safety gear including goggles footwear, and gloves. Your dress shouldn’t be loose and you shouldn’t wear loose accessories including a necklace or tie.
- Don’t operate the machine in the proximity of other people or animals. And don’t point the jet towards yourself or other humans while the trigger is pulled.
- Only use cold water with the washer to elongate its life.
- If you want to take a break during washing, you should always switch off the motor and unplug it from the power outlet to
- Switch off the unit when you take a break. Engage the safety lock on the trigger gun when you don’t want to spray.
Before every use, check if every nut and screw is tight enough.
Assemble the Unit
The unit needs assembly when it first arrives.
What’s Included in the Package
Here is what you will get in the package:
- The unit with mounted detergent, power cord, and engine;
- Spray wand with nozzle holder;
- Three nozzles;
- Handle with nozzle storage; and
- Pressure hose.
Some models of RYOBI pressure washers come with detached wheels which you have to assemble after unpacking. But this model comes with assembled wheels. See below to know how you would assemble other parts.
Assembling Hoses and Spray Guns
Start with connecting the wand with the trigger gun. Screw the two together.
Then, connect the gun with the high-pressure hose using the screw available in the gun. Once screwed, check for tightness as this connection has to bear high pressure of water.
Now, you have to connect this hose with a water outlet from the pump.
After you have assembled the waterline within the washer, it’s time to connect it to the water source in your garden. Make sure that the garden hose’s pressure is no less than 20 PSI.
Connecting the Power
Use the given power cord to connect to the right power outlet in your home. Follow the recommendations given in the manual. This particular model, RYOBI 2300 PSI pressure washer, requires an outlet with 120V/60Hz AC rating.
You can use an extension cord when needed but that’s not recommended. If it is necessary, make sure that it also adheres to the guidelines given in the manual.
Upon arrival, you have to assemble its handle. Simply, insert its two ends in the designated positions to assemble the handle.
Now your machine is assembled and ready to be used, let’s see the process to run it.
First, you have to release the pressure previously built up in the hose. Do this after running the water supply as well as the machine but before connecting a nozzle. Switch on the on/off switch at the top of the pump and then make sure that you are pointing in a safe direction before pulling the trigger to release air bubbles and debris trapped within the hose.
Connecting the nozzle
You get three nozzles with most units from RYOBI. These include a rinsing nozzle for lighter cleaning, a soap nozzle, and a turbo nozzle. Turbo nozzle is the high-pressure nozzle that you would want to use only to carry out intense cleaning. The soap nozzle only sprays soap and detergent and has the lowest pressure.
It’s easy to apply a nozzle. You start with pulling the Quick-connect collar before pushing the nozzle in its place. After pushing the nozzle, push the collar to its original place.
The soap injection system built within the pressure washer makes using soap an easy feat in your cleaning routine. All you have to do is to pour the soap into the detergent tank and the induction system will dilute it to a ratio of 20 to 1.
Make sure to use a soap nozzle to spray detergent. And only use those detergents that are labeled as safe for pressure washers. Never use those chemicals that contain bleach or are inflammable.
You also wouldn’t want to let the soap get dry on the surface to prevent streaking.
The first step you do for rinsing is shutting off the motor as well as switching off the water supply.
Release the pressure by pulling the trigger. Now, lock the trigger gun with the built-in lock to prevent accidental sprays.
Now, replace the soap nozzle with the rinse or turbo nozzle. Carefully choose the nozzle to replace. Make sure that it applies enough pressure to clean the stains but isn’t too intense to harm the surface.
Rinse from top to the bottom and overlap the strokes to get satisfactory results.
Moving the washer
If you want to move the washer during or after the washing routine, do so without damaging the cords and hoses. You first have to turn the machine off.
Holding its handle, tilt the washer slightly towards you. The tilt should be enough for the washer to balance on the wheels. At this position, you can pull it to move its position.
Get rid of excess soap in the detergent tank when you get ready to shut off the washer. Do so by diluting the soap in the tank by filling it with clean water. Once you have sprayed this water using the spray wand, the washer should be clean of detergent.
If it’s still not clear, fill the tank once more and spray. Next, you have to release the pressure before switching off the washer and disconnecting the power supply.
Never leave detergent in the detergent tank. Also, safeguard the hose against tangling and kinking by rolling it adequately and hanging it in its storage space. Also, get rid of all the pressure that is built up within the spray wand.
Always store the unit indoors. At the same time, you should make sure that the storage place doesn’t get too cold. Precisely, its temperature shouldn’t go below 32°F. Lower temperatures can cause irreparable damage to the pump.
You would also not want to store it near the furnace because of the possible consequence of a dried-out pump.
RYOBI 2300 PSI pressure washer offers higher pressure intensity than other models from this brand. It is one of the most desired power washers because of its sturdiness and long hoses. Interestingly, its use is also easy.
Upon arrival, you get the washer mostly assembled. You may still have to assemble the spray want, hose, water supply, and handle. Then you connect with the power supply and use different nozzles to switch between applying detergent and rinsing.
We hope that you enjoyed this post about how to use Ryobi Pressure Washer! If so, please share it with your friends and family!
Q: Can you run a Ryobi pressure washer without water?
A: It’s possible to run the pressure washer without water but you wouldn’t want to do it. If you run a power washer without switching on the water supply, you will damage its pump permanently.
Q: For the Ryobi pressure washer, can you supply water out of a bucket?
A: The best water source that you should use for a pressure washer is a garden hose. It is the most suitable option because it offers similar water pressure as is required by a power washer. As we have noted in the article, you shouldn’t attach a water supply that falls below 20PSI.
Likewise, you should try to siphon supply the water for use in a power washer because it also doesn’t meet the required minimum pressure of their pumps.
Q: Why does my RYOBI pressure washer have low pressure?
A: There can be several reasons that prevent the jet from reaching its highest pressures. These reasons, along with the ways to deal with them, are given below:
– You may experience low pressure of the sprays if your water supply lags in the input pressure. If this is the case, connect the washer with another water outlet.
– Your power washer may have leaks in the spray wand. You should see if the wand is loosely connected with the trigger gun. Tightening the connection can be a solution for it. If the leak is resulting from the damaged wand, replace the gun.
– Your water inlet filter clog can also adversely affect the pressure. Treat this issue by rinsing it after removing it.
Finally, low pressure may also mean a clogged nozzle. If that is the case, you can use the straightened end of a paper pin to remove the debris.
Q: How to use a gas-powered Ryobi pressure washer?
A: A gas-powered Ryobi pressure works in the same way as does an electric one. The only differences arise when you power the engine.
First, you don’t have to check the label to know when the power outlet should be used with this washer. Secondly, you have to oil the crankcase and fill the fuel tank. In the end, you have to use its starter cord to start the engine. Note that using this starter cord can trigger kickback which is a potentially hazardous situation.