10 Best Gasket For Pressure Cookers To Buy (Our Recommendations)
Replacement Mirro Pressure Cooker Gasket S-9882 For Mirro 12qt/16qt/22qt model M-0512 / M-0522 / M-0312 / M-0406 / M-0416 / M-0526 / M-0622
- 【Pressure cooker gasket】 fits Mirro pressure cooker models: M-0512, M-0522, M-0312, M-0406, M-0416, M-0526 and M-0622. Includes models with -11, -35, etc. such as M-0512-11.compatible with Mirro pressure cooker 12qt/16qt/22qt ,fits many discontinued models.
- 【Mirro pressure cooker Gasket 】Diameter :about 12.6 in. All dimensions are approximate considering gaskets can stretch or shrink to fit specific lids.To ensure compatibility, measure your old gasket and pressure cooker pot.
- 【High-quality 】Our pressure cooker sealing ring gasket are made from high-quality, durable, food-grade silicone, Its lighweight, wear, high stretch and twist, high temperature resistance,and efficient sealing. So it can be washed clean in dishwasher or drain in drying rack.
- 【Simple to install 】: soaking your gasket for pressure cooker in warm water for 10 minutes before installing it can increase pliability.Cleaning the sealing ring groove thoroughly before installation. Insert the gasket and press it firmly into the groove.
- 【PLEASE NOTE: 】 If Your Mirro Pressure cooker Made Before Jan. 1983 Then You Need The 3440 Gasket.
Hawkins A10-09 Gasket Sealing Ring for Pressure Cookers, 2 to 4-Liter, Black
4 used from $2.73
- For Hawkins 2-4 Liter Tall Pressure Cookers
- Genuine Hawkins
- Well designed
- Made in India ; Long Lasting
- Compatible for Hawkins Classic Aluminum 2 Liter, Hawkins Classic Aluminum 3 Liter and Hawkins Classic Aluminum 4 Liter.
Impresa 9 Inch Fagor Pressure Cooker Replacement Gasket (Pack of 2) - Fits Many Fagor Stovetop Models (Check Description for Fit)
- 9" replacement for many 9" diameter Fagor pressure cooker sealing rings when worn/dried-out or when elasticity is lost (or every 12-18 months), per Fagor instructions. Made from high-quality, durable, food-grade silicone. This is a pack of 2 sealing rings. Comparable to Fagor unit # 998010188
- Important Compatibility Information: To ensure compatibility, measure your old gasket and pressure cooker pot. The old gasket should have an inner diameter of approximately 8.5" and an outer diameter of approximately 9.5". The pot should be approximately 9 inches (22.86 cm) in diameter. Please contact us through our seller page or ask a question if you are unsure about the fitment and compatibility
- Compatible with many (but not all) Fagor single unit pressure cookers (4, 6 and 7 quart) and pressure cooker sets (4/6 quart and 4/7 quart), including Rapida, Rapid Express, Duo / Cook's Essentials, Ucook, Multirapid Plus, Splendid-Weighted, Express, Futuro, Elite and Splendid
- Important Non Compatibility Information: Gasket Does Not Fit any of the following - Does not fit 8 quart and the 10 quart single unit cookers, 4/8 quart cooker sets, pressure cooker/fryer (with clamp-down lid), or electric cookers, including Electric Multi Cooker, Premium Pressure Cooker (6/8 quart) and Lux Multi-Cooker (4/6/8 quart and white)
- Only For Fagor - Not For Use With Other Pressure Cooker Brands. Comparable to Fagor unit # 998010188. This pressure cooker replacement gasket is an aftermarket replacement product (produced by Impresa)
10 Inch Fagor Pressure Cooker Replacement Gasket (Pack of 2) - Fits Many 10 inch Fagor Stovetop Models (Check Description for Fit)
- Replacement for Many 10" (Inch) diameter Fagor pressure cooker sealing rings when worn/dried-out or when elasticity is lost (or every 12-18 months), per Fagor instructions. Made from high-quality, durable, food-grade silicone. Pack of 2. Fagor only. Comparable to Fagor # 998010189
- Not A One Size Fits All: To ensure compatibility, measure your old gasket and cooker pot. The old gasket should have an inner diameter of approx. 9.5" and an outer diameter of approx. 10.5". The pot should be approx. 10" (inches) in diameter. Fits 8 and 10 Quart Duo, Cayenne, 10 Quart Splendid, 10 Quart Futuro, and Elite. Please contact us through our seller page or ask a question if you are unsure about the fitment and compatibility
- Compatible with many (but not all) Fagor single unit pressure cookers and pressure cooker sets with a 10 inch diameter pot including Rapida, Rapid Express, Duo / Cook's Essentials, Ucook, Multirapid Plus, Splendid-Weighted, Express, Futuro, Splendid and Chef. We cannot guarantee compatibility with all and strongly recommended measuring as instructed or contacting us through our seller page before purchasing
- Important Fitment Information: Gasket Does Not Fit any of the following: Does not fit 4, 6 & 7 Quart Single Unit Cookers, 4/6 & 4/7 Quart Sets, Pressure Cooker/Fryer (W/ Clamp-down Lid), Or Electric Cookers, including Electric Multi Cooker, Premium Pressure Cooker (6/8 quart) and Lux Multi-Cooker (4/6/8 quart/white)
- Only For Fagor - Not For Use With Other Pressure Cooker Brands. Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house testing). Comparable to Fagor # 998010189.
2-Pack of Presto Pressure Cooker Sealing Ring / Gasket & Overpressure Plug (2 Sets per Pack) - Part 09936, 09904 and 50295 - Fits Various 6-Quart Presto Models - By IMPRESA
- 2 pack: Ideal upgrade or replacement for many but not all 6 quart models of the Presto pressure cooker sealing ring and Presto overpressure plug when deformation is present or when they become hard or inflexible, per Presto instructions
- Compatible Replacement for Presto Parts 09936, 09904 and 50295, various 6 quart models. Our pressure cooker gaskets are made from high-quality, durable, food-grade silicone
- This Is Not A One Size Fits All - Please measure first for compatibility. Fits various 6 quart models, including standard (0126002, 0135001-0135004, 0136001, 0136102, 0136304, 0136403, 01/PS6), aluminum (0126407, 0126408, 0126410), stainless steel (0136203, 0136206, 0136210) and electric stainless steel (0216001)
- Measurements - Outer Diameter 9.5", Inner Diameter 8.5'' Dishwasher safe. Note: This is an aftermarket replacement product meeting or exceeding the quality of OEM sealing rings (based on in-house testing). Not for use with other pressure cooker brands, only with Presto models listed above
- Please send us a message if you have any compatibility questions before purchasing the gaskets for 6 quart pressure cookers
Replacement Mirro S9892 gasket For Mirro Pressure Cooker S-9892 9892 M-0296 M-0436 M-0498 M-0536 M-0596 M-0646 M-1952 Fit ４｜6 ｜ 8 QT Models
- Our pressure cooker gasket are made from high-quality, durable, food-grade silicone, Factory sealed and individually wrapped.
- Replacement pressure cooker gasket for select 4, 6 and 8 quart pressure cooker,replacement mirro pressure cooker Part Numbers: S-9892, S9892, 9892. Fits Mirro models (may be partial list): M-0296, M-0436, M-0498, M-0536, M-0596, M-0598, M-0646, M-1952, M-1956 (Includes models with -11, -35, etc. such as M-0536-11).
- Pressure cooker rubber gasket Dimensions :Outside Diameter:10.08" , Diameter : 10" ,Thickness: 0.4" . All dimensions are approximate considering gaskets can stretch or shrink to fit specific lids.
- PLEASE NOTE: Not suitable for S9882, nor suitable for righr,Fargor pressure cooker seals.
- Simple to install : To ensure compatibility, measure your old gasket and pressure cooker pot. pressure cooker sealing rings are manufactured to arrive up to 1" too large to be resilient to normal shrinkage. soaking your gasket for pressure cooker in warm water for 10 minutes before installing it can increase pliability.
2 Pack Pressure Cooker Gasket S-9882 Pressure Canner Gasket Fit for Mirro 12qt/16qt/22qt Model M-0512 M-0522 M-0312 M-0406 M-0416 M-0526 M-0622
- Compatible Models: Pressure cooker gasket fit for Mirro M-0512 M-0522 M-0312 M-0406 M-0416 M-0526 M-0622 ( including models with -11, -35, such as M-0522-11)
- Replace S-9882 pressure canner gasket 12qt/16qt/22qt, ( not for S-9892), fit for many discontinued models
- Specification: Product measures 14" and dimensions are approximate ( considering that gaskets can stretch or shrink to fit most covers ), please measure your gasket or cover before purchasing to ensure a perfect installation
- High-Quality Material: Compared with ordinary rubber, ours are made of high-quality rubber material, high temperature resistance, corrosion resistance, high stretch and reliability, and longer service life
- Note: If your pressure cooker was manufactured after January 1983, you may need to purchase a 3440 washer, if you have any questions, please contact us in time
Prestige Junior Sealing Ring Gasket for Popular & Popular Plus Aluminum 4/5/6-Liter Prestige Pressure Cookers, Black, 8.5"
- Suitable for Prestige Popular 4-Liter, 5-Liter, 6-Liter Cookers Only
- Suitable for Prestige Popular+ 4-Liter, 5-Liter, 6-Liter Cookers Only
- Will not work with other Prestige Model Cookers or other brands
- Genuine Prestige Gasket
- Made in India
Original Sealing Ring for 6 Qt Power Cooker - Replacement Silicone Gasket Seal Rings for 6 Quart Power Pressure Cooker PPC770 PCXL-PRO6, PC-TRI6, PPC771, PRO, WAL1,WAL2 Accessories Parts 2-Pack
- COMPATIBLE / PERFECT FIT - These Replacement Silicone Gasket Seal for many models of the Power Pressure Cookers 5&6 Quart including but not limiting to XL (5 or 6 quarts), cpc600, YBD60-100, PPC780, PPC770, and PPC790, for the 5 or 6 Qt.
- DISHWASHER SAFE - 100% food-grade, BPA-free,LFGB,SGS certificated. No more retained odors. Super easy to clean, Dishwasher Safe. Great replacement sealing rings for your Power cooker.
- RECOMMEND TIPS - Recommended to replace your power pressure rubber gasket every 12-18 months ,as they are part of the lid of Power Pressure Cooker, and are essential for pressure cooker to work ! Two lines on the rim made a groove to fit underneath the wire strongly. Once firmly in place, you should not be able to pop it out easily. Fit snugly for 5 or 6 Quart Power Cooker such as PPC770, PPC770-1, PCXL-PRO6, PC-TRI6, and PC-WAL1.
- PRODUCT SPECIFICATION - Inner diameter approximately is 8.7", outer diameter of approximately is 9.5", height is 0.75", Fits 5 quart and 6 quart Power Cooker such as PPC770, PPC770-1, PCXL-PRO6, PC-TRI6, PC-WAL1 and WAL2.
- WARRANTY - Satisfaction Guarantee, Easy to install and remove, seal perfectly, No food odor mixed anymore!Within 24hours Reply,30 days money back guarantee,shopping with confidence.
S-9882 Pressure Canner Gasket Replacement mirro Pressure Canner 12qt/22qt Pressure Cooker Large Gasket fits many Discontinued Models with-11 -35 etc such as Model # M-0512-11mirro Pressure Canner
$24.88 in stock
- Compatibility: Pressure Cooker Can Gasket for Mirro Models M-0312, M-0312-35, M-0406, M-0416, M-0512, M-0512-11, M-0522, M-0522-11, M -0526, M-0526-11, M-0528, M-0622.
- Replacement Mirro S-9882 12qt/22qt Pressure Cooker Large Washer for 12qt/ 22qt Pressure Cooker Large Washer for many discontinued models with -11, -35 etc, eg model M-0512-11mirro pressure pot fits many discontinued models. Mirro Spacer 14" diameter. All dimensions are approximate considering spacers can stretch or shrink to fit specific lids.
- Please Note: Only available on models manufactured after January 1983. If your model was made before January 1983, you will need a 3440 washer.
- Installation and Maintenance: To ensure compatibility, measure your old gasket and pressure cooker. To make it durable, soak the gasket in hot water for 10-15 minutes before installation to increase flexibility. Rinse and dry thoroughly. Apply a very light layer of cooking oil to the bottom of the body lugs to make the lids easier to open and close.
- After-sales service: We provide customers with high-quality products and services. If you have any questions, please contact us, we will provide you with a satisfactory shopping experience.