Drip Pressure Regulator
Top 10 Best Drip Pressure Regulator To Buy (Our Recommendations)
3
Rain Bird PRF07530S Drip Irrigation In-Line 30 PSI Pressure Regulating "Y" Filter, 3/4" Male Pipe...
View At Amazon
Amazon.com
Senninger Pressure Regulator 25 PSI 3/4" Hose Thread Drip Irrigation Pressure Reducer Low Flow Valve - Landscape Grade High Performance
$15.99
in stock
4 new from $15.50
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation. This PRLG (Pressure Regulator Landscape Grade) maintains a constant outlet pressure of 25 PSI (1.72 bar) with a flow range between 0.5 - 7 GPM (114 - 1590 L/hr).
- 100% water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.
- Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 3/4" outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.
- Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.
- Important note: This irrigation pressure regulator regulates dynamic water pressure (the pressure while water is flowing). If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. This blocks the flow of water and measures static pressure, not dynamic pressure. To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator.
Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread
$6.77 in stock
12 new from $6.77
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Maintains optimum 25 psi pressure and water flow to Drip lines and emitter devices
- Connects to any 3/4" male pipe threaded faucet, garden hose or component
- 20 gallon per minute flow through capacity
- Durable, robust design provides reliable operation
- Constructed of highly durable UV and chemical-resistant materials
Rain Bird PRF07530S Drip Irrigation In-Line 30 PSI Pressure Regulating "Y" Filter, 3/4" Male Pipe Thread
$21.97 in stock
5 new from $21.97
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- 3/4" Y filter unit combines filtration and 30 psi pressure regulation in one piece
- Reduces the number of components in system and speeds installation
- Protects and prevents clogging of downstream Drip irrigation components
- 200 mesh (75 micron) Stainless-steel filter pre-installed; cap unthreads for quick cleaning
- Works with all types and brands of 3/4" irrigation valves
Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required
$19.45 in stock
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent backflow all with a single pre-assembled unit.
- Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig.
- Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.
- Don't settle for leaks and blowouts. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention. Senninger 25 PSI pressure reducer is checked for accuracy and known worldwide for its reliable performance.
- Save money and time buying everything you need at once. Jumpstart your drip irrigation installation with this set of essential components for building a maintenance-free drip system. Ideal for use with raised garden beds, residential, farm, greenhouse gardening and agricultural watering applications.
Pressure Regulator 25 PSI, 3/4" FHT × 3/4“ MHT, Pressure Reducer Low Flow Valve, Great for Drip Irrigation System (2 Pack)
$13.99
in stock
2 new from $13.99
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Moistenland 25 PSI preset pressure regulators (hose thread) are used to reduce and regulate the incoming pressure of a household’s water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.
- High-strength ABS construction for durability, available with 3/4” female hose thread to fit all standard hose or pipe thread connections
- Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). It may be connected to an automated timer, backflow preventer, or filter, if desired.
- This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA.
Rain Bird PRS05030S Drip Irrigation 30 PSI Retrofit Pressure Regulator for 1/2" Threaded Riser
$7.98
in stock
3 new from $7.98
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Easily converts a 1/2" riser or existing shrub spray to low volume Drip watering system
- Provides 30 psi pressure regulation for best performance of micro-watering devices
- Designed for use with free flow Drip irrigation manifolds
- Top outlet accepts a 1/2" threaded Drip manifold (sold separately)
- Use with Rain Bird free flow manifold models (sold separately): MANIFRE1S, MANIFRE4S, and MANIFRE6S
Heavy Duty 25 psi Water Pressure Regulator 3/4 inch Hose Thread Drip Irrigation System Pressure Reducer, Lead-Free Brass
$15.99
in stock
2 new from $15.99
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Maintains water pressure between 20-30 psi (25 psi nominal). 0-6.8 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 145 psi.
- Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada.
- It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead.
- Upgrade your plastic pressure regulator to this durable, heavy duty lead-free brass pressure regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.
- Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
Vibrant Yard Co. LLC 25 psi Pressure Regulator for Drip Irrigation System with Hose Thread – Heavy Duty Lead-Free Brass
$14.99
in stock
2 new from $14.99
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Maintains water pressure between 20-30 psi (25 psi nominal). 0-6.3 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 155 psi. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.
- Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib, spigot, or garden hose in USA and Canada.
- It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead.
- Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic pressure regulator. Its all metal (lead-free brass) exterior is impervious to sunlight.
- Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
Raindrip PRYF 30 Pressure-Regulating Y Filter, X 3/4 in. MPT, Black
$20.65 in stock
3 new from $20.65
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system; Connects to pipe commonly used in underground valve systems
- Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point; Use with a ¾ in. FPT Swivel Adapter to connect supply tubing
- Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point; Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water; the filter can also be removed from the middle housing and pulled out to clean
- Regulates water pressure from water source; preset at 30 PSI, ideal for most drip irrigation systems; 200-mesh filter washer blocks particles in the water from clogging emitters; filter is removable for cleaning and maintenance; Filter can be flushed out by removing the flush cap or cleanout cap and running water through; also can be removed from the middle housing to clean
- Comes with one ¾ in. MPT X ¾ in. MPT Pressure-Regulating. “Y” Filter
25 psi Water Pressure Reducer Regulator for Drip Irrigation System, 3/4 inch Hose Thread, 150 psi Max Inlet Pressure, Lead-free Brass
$15.99
in stock
2 new from $15.99
Free shipping
Amazon.com
as of November 1, 2022 4:02 pm
Features
- Maintains water pressure between 20-30 psi (25 psi nominal). 0-6.5 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 150 psi. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.
- Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada.
- It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead.
- Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.
- Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
